Two, Three and Four Electrode Experiments
Mit dieser Applikationsschrift in englischer Sprache werden die verschiedenen Möglichkeiten zur Kontaktierung elektrochemischer Messzellen erläutert. Durch die unabhängige Messung von Strom und Spannung sind maximal 4-Elektrodenanordnungen messbar.

Download application note

 


PRODUKTS FOR THIS APPLICATION:





GAMRY REFERENCE 3000 POTENTIOSTAT / GALVANOSTAT / ZRA
The high-end potentiostat for all demanding applications in electrochemistry from very low to high currents.

GAMRY REFERENCE 3000 POTENTIOSTAT / GALVANOSTAT / ZRA - AUXILIARY ELECTROMETER (AE)
The well-known high-end Reference 3000AE Potentiostat/Galvanostat/ZRA with eight additional auxiliary electrometers (AE).

GAMRY REFERENCE 3000 (AE) AND REFERENCE 30K BOOSTER
The Reference 3000 (AE) Potentiostat/Galvanostat/ZRA high performance and multi-purpose basic unit can be combined with the Reference 30k Booster and is ideal for evaluating new highest-level technologies for batteries, fuel cells, supercapacitors and high turnover electrochemical synthesis.

GAMRY LPI1010 INTERFACE
Interface for loads and power supplies for EIS characterization of batteries and fuel cells available in three versions (10 V, 100 V and 1000 V)

GAMRY ECM8 (ELECTROCHEMICAL MULTIPLEXER)
The ECM8 (Electrochemical Multiplexer) with its limitation compared to multi-channel systems is suitable for any application where higher experimental throughput can increase the significance even by sequential measurements.

GAMRY SOFTWARE
Gamry has developed its own software for each important application in electrochemistry and offers a very simple and intuitive handling through open source scripting, flexible and uncomplicated, even the customized experiment as well as with other programming languages such as LabView, C++, etc.

GAMRY DIGIELCH
DigiElch is a simulation program with a unique selection of different functions for a variety of electrochemical experiments

GAMRY UV VIS NIR SPECTROELECTROCHEMISTRY
For synchronization of spectroscopic information with the electrochemical change of a redox pair Gamry offers the right system from UV to NIR

GAMRY RAMAN SPECTROELECTROCHEMISTRY
Synchronization of electrochemical changes of a redox reaction with complex scattered light spectroelectrochemistry or Raman spectroelectrochemistry

GAMRY CONDUCTIVITY MEASURING CELL FUMATECH MK 3
The MK 3 simulates with high accuracy typical fuel cell conditions for conductivity measurements via electrochemical impedance spectroscopy in combination with the Gamry System Reference 600+ or Interface 1010E.

GAMRY LITHIUM BATTERY MATERIALS CELL KIT
The design of the Lithium Battery Materials Cell Kit allows very flexible investigation of electrode materials of a lithium-based galvanic cell.

GAMRY UNIVERSAL BATTERY HOLDER (UBH)
The all-rounder among battery holders - designed for cylindrical 18650 cells as well as button cells - with high flexibility in dimensions and connection options

GAMRY BATTERY HOLDER FOR COIN CELLS (DUAL-CR2032) AND 18650 (DUAL-18650)
For electrochemical impedance spectroscopy on the coin cell types CR2016, CR2025 and CR2032 or on the cylindrical 18650 cell

GAMRY RDE710 - ROTATING DISK- (RDE), -RING-DISK- (RRDE) OR -CYLINDER ELECTRODE (RCE)
RDE710 Rotator for RDE, RRDE and RCE is designed for hydrodynamically controlled electrode reactions both for the characterization of catalysts and for determining flow-induced corrosion rates.

GAMRY FARADAY SHIELD
The successor to the Gamry VISTASHIELD continues to provide effective shielding from environmental electronic noise for demanding measurements at very low current levels and even with large measuring cells.

GAMRY - EURO CELL KIT
The Euro Cell Kit is the entry-level model for electrochemical corrosion measurements on cylindrical specimens

GAMRY FLEXCELL CRITICAL PITTING TEMPERATURE CELL KIT WITH TDC5
With Gamry´s FlexCell Cell Kit the critical pitting temperature is determined while avoiding the effects of crevice corrosion on flat specimens.

GAMRY MULTIPORT CORROSION CELL KIT
The design of the MultiPort Corrosion Cell Kit allows easy cleaning and a high degree of flexibility for electrochemical corrosion experiments on many sample geometries.

GAMRY PARACELL KIT FOR FLAT SPECIMEN
The ParaCell Kit for galvanic corrosion measurements and electrochemical noise measurements enables the investigation of many flat samples either against a graphite counter electrode or a second working electrode in symmetrical arrangement.

GAMRY PAINT TEST CELL (PTC1)
The Paint Test Cell Kit is the smallest and most cost-effective electrochemical measuring cell kit from Gamry.

GAMRY REFERENCE ELECTRODES
The selection of the correct reference electrode determines the quality for electrochemical measurement results and their lifetime.

GAMRY WORKING ELECTRODES
Working electrodes of different dimensions and inert materials



Request a quote

Technical support

Contact us!

Request a quote Technical support Contact us!
LINKS AND GTC    ///   IMPRINT    ///   DATA PROTECTION    ///   PRODUCTS    ///   DIESE SEITE AUF DEUTSCH