CRYOGENIC GRINDERS
The SPEX 6775 Freezer / Mill® cryogenic grinder - for sample quantities from 0.1 to 5 g. The last alternative when grinding temperature-sensitive samples or for samples impossible to grind at ambient temperature.
During the grinding process, the sample container is PERMANENTLY immersed in liquid nitrogen - this makes the sample brittle and easy to grind. Biological samples are processed gently without thermal stress. The permanent cooling, the robust mechanics with only one moving part and the intuitive touchscreen operation ensure maximum efficiency and durability.
The SPEX 6875 / 6875A Freezer/Mill® cryogenic grinder - for sample quantities from 0.1 to 100 g. The last alternative when grinding temperature-sensitive samples or for samples impossible to grind at ambient temperature.
During the grinding process, the sample container is PERMANENTLY immersed in liquid nitrogen - this makes the sample brittle and easy to grind. Biological samples are processed gently without thermal stress. The permanent cooling, the robust mechanics with only one moving part and the intuitive touchscreen operation ensure maximum efficiency and durability.
The SPEX 6875D Freezer / Mill® cryogenic grinder - for sample quantities from 2 x 0.1 to 100 g. The last alternative when grinding temperature-sensitive samples or for samples impossible to grind at ambient temperature.
During the grinding process, the sample container is PERMANENTLY immersed in liquid nitrogen - this makes the sample brittle and easy to grind. Biological samples are processed gently without thermal stress. The permanent cooling, the robust mechanics with only one moving part and the intuitive touchscreen operation ensure maximum efficiency and durability.
BEADBEATERS & HOMOGENIZER
Inexpensive entry into fast and efficient homogenization and cell lysis allowing a variety of grinding vial types of 2ml, 5ml, 7ml and 12ml - up to six vials at the same time.
The SPEX 1200 GenoLyte® compact homogenizer allows the use of grinding vials made of plastic, stainless steel, agate or tungsten carbide. The various sample matrices are disrupted with highest efficiency using a unique horizontal figure eight grinding movement at a maximum speed of 4000 rpm.
The entry into high-throughput cell disruption as well as fast and efficient sample homogenization - simultaneous homogenization of 192 samples in 2 x 96 deep well plates or up to 6 x 50 ml tubes
Bead beating with the SPEX 1600 MiniG® is carried out by a vertical movement that is identical at all sample positions with a maximum frequency of 1500 strokes per minute. Temperature-sensitive samples can be ground using optionally available cooling adapters.
High-throughput cell disruption as well as fast and efficient sample homogenization - simultaneous homogenization of 576 samples in 6 x 96 deep well plates or up to 16 x 50 ml tubes
Bead beating with the SPEX 2010 Geno/Grinder® is carried out by a vertical movement that is identical at all sample positions with a maximum frequency of 1750 strokes per minute. Temperature-sensitive samples can be ground using optionally available cooling adapters.
Automated mechanical cell lysis as well as fast and efficient high-throughput tissue processing - simultaneous homogenization of 576 samples in 6 x 96 deep well plates or up to 16 x 50 ml tubes.
Bead beating with the SPEX 2050 Genomax™ is carried out by a vertical movement that is identical at all sample positions with a maximum frequency of 1750 strokes per minute. Optimized extraction programs are already preinstalled for the also available DNAmax kits. Temperature-sensitive samples can be ground using optionally available cooling adapters.
BORATE FUSION FLUXER
The Katanax Fluxer K1 Prime from SPEX – preparation of glass disks (beads) for XRF or solutions for AA and ICP with one sample position, fully electric without gas or other media ... Fusion has never been so easier and safer.
The K1 Prime has an intuitive touchscreen operation and works fully automatically, which ensures fast, simple and, above all, reproducible sample preparation with maximum efficiency. The change from preparing glass disks to solution preparation takes place in a few simple steps by replacing the crucible heater module with the (optional) stirring module without needing tools. (No longer available - its successor will follow soon).>/strong>
The Katanax Fluxer X-300 from SPEX - preparation of glass disks (beads) for XRF or solutions for ICP with one, two or three sample positions, fully electric without gas or other media ... Fusion has never been so easier and safer.
The modular X-300 from Katanax has an intuitive touchscreen operation and works fully automatically. Seven independently controlled heating elements made of acid-resistant ceramic guarantee exact temperature control and thus reproducible results with a long service life. The optionally available stirring module can remain installed permanently and enables a quick change from preparing glass disks to solution preparation.
The Katanax X-Fluxer® X-600 from SPEX – preparation of up to 6 glass disks for XRF or up to 6 solutions for ICP in parallel - fully electrically without gas or other media ... Fusion has never been so easier and safer
The X-600 from Katanax has an intuitive touchscreen operation and works fully automatically. Seven independently controlled heating elements made of acid-resistant ceramic guarantee exact temperature control and thus reproducible results with a long service life. The optionally available stirring module can remain installed and enables a quick change from preparing glass disks to solution preparation.
The automatic dosing machine SPEX Sampleprep Katanax XFP-01 FluxPenser® - precise and reproducible weighing of flux - including balance and LIMS compatibility
There are two operating modes to choose from for dispensing fusion flux, either dispensing a defined amount (for ICP) or dispensing a certain flux / sample ratio (for XRF). The correct amount of flux is calculated automatically, the accuracy of dispensing is within 1 mg.
HIGH ENERGY BALL-MILL´S
Compact laboratory ball mill for small sample quantities - grinding and homogenizing in 2ml, 3.5ml, 5ml, 7ml and 12ml tubes - up to six grinding vials at the same time.
The 5120 Mixer / Mill® laboratory ball-mill allows the use of grinding vials made of plastic, stainless steel, agate or tungsten carbide. The various sample matrices are disrupted with highest efficiency using a unique horizontal figure eight grinding movement at a maximum speed of 3500 rpm.
The 8000M Mixer / Mill® high-energy ball mill from SPEX - grinding, mixing and mechanical alloying with one grinding vial holder
The unique grinding movement of the 8000M Mixer / Mill, resembling the shape of a lying figure eight, represents the standard in the application area of "mechanical alloying". The operating time for this application can be extended to 10,500 minutes. Other areas of application are the grinding of rock, ceramics and slag. Grinding vials made of steel, agate, tungsten carbide, zirconium and plastic in different volumes up to 50mL can be used.
The 8000M Mixer / Mill® high-energy ball mill from SPEX - grinding, mixing and mechanical alloying with double capacity.
The unique grinding movement of the 8000D Mixer / Mill, resembling the shape of a lying figure eight, represents the standard in the application area of "mechanical alloying". The operating time for this application can be extended to 10,500 minutes. Other areas of application are the grinding of rock, ceramics and slag. Grinding vials made of steel, agate, tungsten carbide, zirconium and plastic in different volumes up to 2 x 50mL can be used.
PELLET PRESSES
Pressing pellets for IR-analysis - fast and economical ... the SPEX 3626 manually controlled laboratory press - an easy-to-use press with a pressure range of up to 10.9 tons for using the 13mm die set.
After closing the safety shield, the desired pressure for pressing the pellet is applied manually using the hand lever; the pressure can be read on the pressure gauge. Holding and relief time are regulated manually by the user.
Pressing pellets for IR- and XRF-analysis - fast and economical ... the SPEX 3621 manually controlled laboratory press - an easy-to-use press with a pressure range of up to 10.9 tons for using various die set´s.
After closing the safety shield, the desired pressure for pressing the pellet is applied manually using the hand lever; the pressure can be read on the pressure gauge. Holding and relief time are regulated manually by the user.
Pressing pellets for IR- and XRF-analysis - fast and economical ... the SPEX 3622 manually controlled laboratory press – the “allrounder” with a pressure range of up to 22.7 tons for using various die set´s.
After closing the safety shield, the desired pressure for pressing the pellet is applied manually using the hand lever; the pressure can be read on the pressure gauge. Holding and relief time are regulated manually by the user.
RING & PUCK MILLS
For the extremely fast size reduction of hard, medium-hard, brittle and fibrous samples to analytical fineness. Dry or in suspension.
The SPEX 8550 Shatterbox® enables the grinding of 5-150g sample material, therefor ten individually configurable grinding programs are available. Depending on the hardness of the sample, grinding dishes made of hardened steel, tungsten carbide, aluminum oxide or zirconium oxide are available. To protect the user, the device has a safety interlock, the sound insulation ensures the best possible protection against excessive noise.