MATERIALS RESEARCH/DEVELOPMENT
3D PRINTING

Beurteilung der Wärmeleitfähigkeit sowie der Anisotropie von 3D gedrucktem Leichtbeton
 

Herstellung von homogenem Feedstock für das 3D-Druckverfahren LMM
 

Herstellung homogener Verbundwerkstoffe für den 3-D Druck
 

Herstellung homogener Druckmaterialien für den 3D Druck
 

Measurement of thermal conductivity of construction materials using Hot Disk device
BATTERY DEVELOPMENT

Herstellung von Hochenergiekathoden für Lithium-Ionen-Batterien mit neuartigem Elektrodenaufbau
 

Anisotropy – Thermal Conductivity Tests of Batteries
 

C3 Portfolio zum Applikationsbereich Batterie
 

EIS in Wetting of Lithium-ion Battery Materials
 

Vergleichsstudien an elektrokatalytischen und photokatalytischen Wasserstofferzeugungskatalysatoren
 

Getting Started With Your First Experiment: EIS300 Electrochemical Impedance Techniques- Potentiostatic Electrochemical Impedance Spectroscopy
 

Cable-capacitance Correction
 

Leitfaden – Anschluss und Parameter für elektrochemische Messungen an Batterien
 

Gleichzeitige Messung beider Halbzellen einer Batterie mit dem Interface 5000
 

Introduction to Non-standard Charge-discharger Cycle Tests: Custom Current Profiles
 

Batterieentwicklung / Batterieforschung: Elektrochemische Charakterisierung von Graphitelektroden in Lithium-Ionen Batterien
 

Isothermal Battery Calorimeter – IBC – Charge and Discharge Testing of two 18650 lithium-ion batteries
 

Application Note Low-Impedance-EIS at its Limits with Ref30K-Booster
FUEL CELL RESEARCH

C3 Portfolio zum Applikationsbereich Brennstoffzelle
 

Total Harmonic Distortion (THD)
 

Electrochemical characterization of a CFY-stack with planar electrolyte-supported solid oxide cells in rSOC operation
 

Vergleichsstudien an elektrokatalytischen und photokatalytischen Wasserstofferzeugungskatalysatoren
 

Katalysatorentwicklung für Brennstoffzellen
CARBON NANO TUBES (CNT)

CNT Dispersion Application by THINKY Planetary Centrifugal Mixer
COATINGS/FILMS

Film Growth studied using a quartz crystal microbalance
 

Charakterisierung und Bewertung der Eigenschaften von 2K-Polyurethan-Coatings
ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY

Drift Correction in EIS
 

The Basics of Electrochemical Impedance Spectroscopy Part 1
 

The Basics of Electrochemical Impedance Spectroscopy Part 2
 

The Basics of Electrochemical Impedance Spectroscopy Part 3
 

The Basics of Electrochemical Impedance Spectroscopy Part 4
 

Determining the Tortuosity and the Pore Resistance of Porous Lithium-Ion Electrodes using Electrochemical Impedance Spectroscopy via a Gamry Interface 5000E
 

The Quality of Your Fit in EIS
 

Electrochemical Impedance at a Rotated Disk Electrode
 

Electrochemical characterization of a CFY-stack with planar electrolyte-supported solid oxide cells in rSOC operation
 

EIS in Wetting of Lithium-ion Battery Materials
 

Getting Started With Your First Experiment: EIS300 Electrochemical Impedance Techniques- Potentiostatic Electrochemical Impedance Spectroscopy
 

Cable-capacitance Correction
 

Gleichzeitige Messung beider Halbzellen einer Batterie mit dem Interface 5000
 

Rapid Electrochemical Assessment of Paint
 

Quick Check of EIS System Performance
 

Low-impedance EIS at its Limits: Gamry Reference 30k Booster
 

Impact on EIS using the Reference 600 / 3000 with an ECM8 Multiplexer
 

How Cabling and Signal Amplitudes Affect EIS Results
 

Use of Transmission Lines for Electrochemical Impedance Spectroscopy
 

The Implementation of Transmission Lines Using Generalized Circuit Blocks
 

EIS of Organic Coatings and Paints
 

Determination of the correct value of Cdl from the impedance results fitted by the commercially available software
 

Create Your Own Components for EIS Modeling
 

Verification of Low-impedance EIS Using a 1mΩ Resistor
 

OptiEIS™: A Multisine Implementation
 

Equivalent Circuit Modeling Using the Gamry EIS300 Electrochemical Impedance Spectroscopy Software
 

Potentiostatic EIS Tutorial – Getting Started
 

Demystifying Transmission Lines: What are they? Why are they useful?
 

A Snapshot of Electrochemical Impedance Spectroscopy
 

Accuracy Contour Plots – Measurement and Discussion
HYDRAULIC BINDERS

Compressive strength prediction using isothermal calorimetry
 

Evaluating shotcrete accelerator efficiency
 

Approximation of optimum SO3 in hydraulic cement using Heat of Hydration
 

Setting time estimation and prediction using isothermal calorimetry
HYDRATION

Zum Einsatz des Büchi Druckreaktors „midiclave“ bei der Synthese stark enantiomeren angereicherter Duftstoffe
HYDROTHERMAL CARBONIZATION

Zum Einsatz des Büchi Druckreaktors “kiloclave” bei Untersuchungen zur Hydrothermalen Carbonisierung (HTC) von Eichhornia crassipes (Wasserhyazinthe
CATALYSATOR RESEARCH

Elektrochemische Untersuchung biologisch inspirierter molekularer Metalloxidcluster und deren Redoxverhalten
 

Vergleichsstudien an elektrokatalytischen und photokatalytischen Wasserstofferzeugungskatalysatoren
 

Büchi Picoclave für Lehre und Forschung – Katalysatorherstellung und Analyse
CORROSION

THE Method for Crevice Corrosion Repassivation Potentials
 

Electrochemistry in an Autoclave
 

Polarization Resistance Tutorial – Getting Started
 

Comparison of Corrosion Rate Calculated by EFM, LPR, and EIS
 

Getting Started with Electrochemical Corrosion Measurement
MECHANICAL ALLOYING

Mechanical Alloying with the SPEX SamplePrep Mixer/Mill®
 

Der Einsatz der SPEX Mixer/Mill 8000 Serie für das Mechanische Legieren
NANO PARTICLES

Kryogenes Mahlen – Beispiele für Anwendungen
 

Herstellung von Nanokompositen via nasschemischer Synthese maßgeschneiderter Nanopartikel in Dispersion
 

Vom Labor in die Apotheke GMP-Produktion von magnetischen Nanopartikeln
 

Verbessern des Mischens von Silizium-Nanopartikeln mit dem Thinky Mixer
QUARTZ MICROBALANCE

Bestimmung von Löslichkeitskonstanten mit der Quarzmikrowaage
 

Calibration of an Au-coated Quartz Crystal
 

Basics of a Quartz Crystal Microbalance
 

Characterization of a Supercapacitor using an Electrochemical Quartz Crystal Microbalance
 

Monitoring Layer-by-Layer Assembly of Polyelectrolyte Films using a Quartz Crystal Microbalance
 

EQCM Investigations of a Thin Polymer Film
THERMAL PROPERTIES

Changing thermal conductivity of plastics with thermal conductive fillers
 

Thermal Contact Resistance
 

Beurteilung der Wärmeleitfähigkeit sowie der Anisotropie von 3D gedrucktem Leichtbeton
 

Erhöhung der Wärmeleitfähigkeit eines Polypropylens duch Zugabe von Ruß und Bestimmung der anisotropen Wärmeleiteigenschaften mittels Hot Disk Verfahren
 

Near-field radiation on a nano-scale, studied with the Hot Disk TPS 2500S
 

Measurement Accuracy and Thermal Conductivity of Water
 

Wärmeleitfähigkeit von Silikonöl mit der Hot Disk ermitteln
 

Measurement of thermal conductivity of construction materials using Hot Disk device
PRODUCTS FOR THIS APPLICATIONS:





GAMRY INTERFACE 1010 POTENTIOSTAT/ GALVANOSTAT / ZRA
The Interface 1010 is a value oriented, general purpose potentiostat for almost all applications except for high current electrochemistry.

 

SPEX SAMPLEPREP 6775 FREEZER/MILL®
The SPEX 6775 Freezer / Mill® cryogenic grinder - for sample quantities from 0.1 to 5 g. The last alternative when grinding temperature-sensitive samples or for samples impossible to grind at ambient temperature.

 

GAMRY INTERFACE 5000 POTENTIOSTAT / GALVANOSTAT / ZRA
The Interface 5000 Potentiostat / Galvanostat / ZRA is a compact, inexpensive system for material development and condition testing of batteries, super capacitors and fuel cells

 

SPEX SAMPLEPREP 6875 / 6875A FREEZER/MILL®
The SPEX 6875 / 6875A Freezer/Mill® cryogenic grinder - for sample quantities from 0.1 to 100 g. The last alternative when grinding temperature-sensitive samples or for samples impossible to grind at ambient temperature.

 

SPEX SAMPLEPREP 6875D FREEZER/MILL®
The SPEX 6875D Freezer / Mill® cryogenic grinder - for sample quantities from 2 x 0.1 to 100 g. The last alternative when grinding temperature-sensitive samples or for samples impossible to grind at ambient temperature.

 

GAMRY REFERENCE 600+ POTENTIOSTAT / GALVANOSTAT / ZRA
The Reference 600+ is an evolution of the Reference 600 and continues to be used for demanding applications and basic research.

 

GAMRY REFERENCE 3000 POTENTIOSTAT / GALVANOSTAT / ZRA
The high-end potentiostat for all demanding applications in electrochemistry from very low to high currents.

 

GAMRY REFERENCE 3000 POTENTIOSTAT / GALVANOSTAT / ZRA - AUXILIARY ELECTROMETER (AE)
The well-known high-end Reference 3000AE Potentiostat/Galvanostat/ZRA with eight additional auxiliary electrometers (AE).

 

GAMRY REFERENCE 3000 (AE) AND REFERENCE 30K BOOSTER
The Reference 3000 (AE) Potentiostat/Galvanostat/ZRA high performance and multi-purpose basic unit can be combined with the Reference 30k Booster and is ideal for evaluating new highest-level technologies for batteries, fuel cells, supercapacitors and high turnover electrochemical synthesis.

 

GAMRY INTERFACE 1010 BIPOTENTIOSTAT
The Interface 1010 Bipotentiostat System from Gamry is compact, flexible, and inexpensive for all kinds of electrochemical measurements using two channels.

 

GAMRY MULTI-CHANNEL POTENTIOSTAT WITH INTERFACE POWER HUB (IPH)
Multi-channel systems are ideal for any application where significance can be increased by higher experimental throughput.

 

BUCHI POLYCLAVE
Safety and flexibility for a wide range of pressure applications in steel and glass vessels

 

BUCHI VERSOCLAVE
Flexible and robust- even under high pressure

 

BUCHI UNICLAVE
Compact, modular, excellent price/performance ratio, ss/metal pressure reactor system with 0.5 / 1 liter volumina

 

BUCHI MINICLAVE DRIVE
small volumina – strong magnetic drive

 

BUCHI PICOCLAVE
Safety and flexibility with small scale glass and steel reactors

 

BUCHI KILOCLAVE
Safe pressure reactions up to 20 litres in laboratory/kilo lab or in small scale production

 

BUCHI PILOTCLAVE
Safe pressure application on a pilot scale up to 500 litres

 

BÜCHI MIDICLAVE
Safe and comfortable working under high pressure

 

BUCHI NOVOCLAVE
Reach new dimensions in terms of pressure and temperature

 

BUCHI BPC 2
BPC 2 - gas dosing unit for reliable and reproducible hydrogenation

 

BUCHI PARALLEL REACTOR SYSTEM PPR
Safe, Flexible and Efficient

 

BUCHI MINIPILOT [2 …15 LITER]
Stirred glass vessel [2 … 15 liter] with PFA-coated robust steel cover plate

 

BUCHI CR-SYSTEM [15 … 250 LITER]
Stirred enamel vessel with multipurpose glass setup for destillation.

 

GAMRY ECM8 (ELECTROCHEMICAL MULTIPLEXER)
The ECM8 (Electrochemical Multiplexer) with its limitation compared to multi-channel systems is suitable for any application where higher experimental throughput can increase the significance even by sequential measurements.

 

GAMRY EIS BOX 1010
The Gamry EIS Box 1010 consists of an Interface 1010 base unit and an electrochemical multiplexer optimized for impedance spectroscopy (EIS) on batteries, fuel cells and super capacitors up to ±12 V.

 

GAMRY EIS BOX 5000
The Gamry EIS Box 5000 consists of an Interface 5000 base unit and an electrochemical multiplexer optimized for impedance spectroscopy (EIS) on batteries, fuel cells and super capacitors up to ±6 V.

 

GAMRY SOFTWARE
Gamry has developed its own software for each important application in electrochemistry and offers a very simple and intuitive handling through open source scripting, flexible and uncomplicated, even the customized experiment as well as with other programming languages such as LabView, C++, etc.

 

GAMRY EQCM 10M
The eQCM 10M quartz microbalance from Gamry can be used in a very wide resonance frequency range in measuring cells with different holders and crystals for many applications with high information density.

 

GAMRY CONDUCTIVITY MEASURING CELL FUMATECH MK 3
The MK 3 simulates with high accuracy typical fuel cell conditions for conductivity measurements via electrochemical impedance spectroscopy in combination with the Gamry System Reference 600+ or Interface 1010E.

 

GAMRY LITHIUM BATTERY MATERIALS CELL KIT
The design of the Lithium Battery Materials Cell Kit allows very flexible investigation of electrode materials of a lithium-based galvanic cell.

 

GAMRY UNIVERSAL BATTERY HOLDER (UBH)
The all-rounder among battery holders - designed for cylindrical 18650 cells as well as button cells - with high flexibility in dimensions and connection options

 

GAMRY BATTERY HOLDER FOR COIN CELLS (DUAL-CR2032) AND 18650 (DUAL-18650)
For electrochemical impedance spectroscopy on the coin cell types CR2016, CR2025 and CR2032 or on the cylindrical 18650 cell

 

GAMRY RDE710 - ROTATING DISK- (RDE), -RING-DISK- (RRDE) OR -CYLINDER ELECTRODE (RCE)
RDE710 Rotator for RDE, RRDE and RCE is designed for hydrodynamically controlled electrode reactions both for the characterization of catalysts and for determining flow-induced corrosion rates.

 

GAMRY FARADAY SHIELD
The successor to the Gamry VISTASHIELD continues to provide effective shielding from environmental electronic noise for demanding measurements at very low current levels and even with large measuring cells.

 

GAMRY - DR. BOB´S CELL KIT
Dr. Bob´s Cell Kit is made entirely of inert materials and is used in a variety of applications to characterize unknown electroactive species.

 

GAMRY - EURO CELL KIT
The Euro Cell Kit is the entry-level model for electrochemical corrosion measurements on cylindrical specimens

 

GAMRY FLEXCELL CRITICAL PITTING TEMPERATURE CELL KIT WITH TDC5
With Gamry´s FlexCell Cell Kit the critical pitting temperature is determined while avoiding the effects of crevice corrosion on flat specimens.

 

GAMRY MULTIPORT CORROSION CELL KIT
The design of the MultiPort Corrosion Cell Kit allows easy cleaning and a high degree of flexibility for electrochemical corrosion experiments on many sample geometries.

 

GAMRY PARACELL KIT FOR FLAT SPECIMEN
The ParaCell Kit for galvanic corrosion measurements and electrochemical noise measurements enables the investigation of many flat samples either against a graphite counter electrode or a second working electrode in symmetrical arrangement.

 

GAMRY PAINT TEST CELL (PTC1)
The Paint Test Cell Kit is the smallest and most cost-effective electrochemical measuring cell kit from Gamry.

 

GAMRY DYE SOLAR CELL TESTING KIT (IMPS / IMVS) WITHOUT BIPOTENTIOSTAT SYSTEM
This experimental setup of a synchronized bipotentiostat and an optical bench is used for the detailed characterization of dye solar cells

 

GAMRY REFERENCE ELECTRODES
The selection of the correct reference electrode determines the quality for electrochemical measurement results and their lifetime.

 

GAMRY WORKING ELECTRODES
Working electrodes of different dimensions and inert materials

 



Request a quote

Technical support

Contact us!

Request a quote Technical support Contact us!
LINKS AND GTC    ///   IMPRINT    ///   DATA PROTECTION    ///   PRODUCTS    ///   DIESE SEITE AUF DEUTSCH