GLASS REACTORS
Glasrührapparat 15 … 60 (100) Liter mit Destillationsaufbau und Ex geschütztem Motor width=
Stirred enamel vessel with multipurpose glass setup for destillation.

Reactor [CR-Type] with solid jacketed glass lined steel bottom stands for solid construction, excellent heat transfer, stable process conditions and temperatures, and a glass section to easily improve and control chemical reactions by visual observation.


HOT DISK - MEASUREMENT DEVICES
Hot Disk TPS 2200 – Wärmeleitfähigkeitsmessgerät width=
Universal Tool for R&D and QC for a broad range of different materials– meets ISO Standard 22007-2

This general-purpose R&D instrument is designed for precision analysis of thermal transport properties. The TPS 2200 covers a significant span of materials of various geometries and dimensions, including solids, pastes and liquids. I can run all optional measurment modules and meets ISO Standard 22007-2.
 
Hot Disk TPS 2500S – Wärmeleitfähigkeitsmessgerät width=
The Hot Disk TPS 2500 S is the flagship instrument in the system portfolio of Hot Disk AB and covers an extensive range of materials of various geometries and dimensions - meets ISO Standard 22007-2.

This general-purpose R&D instrument is designed for precision analysis of thermal transport properties – including thermal conductivity, thermal diffusivity and specific heat capacity. The TPS 2500S covers the range from 5 mW/mK to 1800 W/mK and with the possibility of very short measurement times you can run also very small bulk samples, thin films or coatings.
 
Hot Disk TPS 3500 Wärmeleitfähigkeitsbestimmung an sehr kleinen und extrem gut wärmeleitenden Proben width=
Testing the extreme – when you have very small and very high conductive samples this is the ideal instrument for testing heat conductivity, thermal diffusivity and specific heat.

The capabilities of TPS 3500 go well beyond that of any other Hot Disk instrument to date, while retaining the documented precision of all TPS thermal conductivity meters. Short measurement times down to 0,1 second and high end electronics enables measurements on extrem good heat conducting as well as small samples - it meets ISO 22007-2.


PLANETARY MIXERS WITHOUT VACUUM
 width=
Mixing and defoaming without vacuum in one step – with patented defoaming mode

Our top-selling planetary centrifugal mixer. Highly efficient without stirrer. Defoaming is often possible without vacuum. The device sports a Mixing and a Defoaming Mode, which differ in the ratio between the two circular movements.
 
Der ARM-310 Planetenzentrifugalmischer, auch Planetenmischer genannt. width=
Mixing and defoaming without vacuum in one step

Our entry-level planetary centrifugal mixer. Highly efficient mixing without stirrer.
 
Der ARE-400Twin, ein Dual-Planetenzentrifugalmischer mit variablem Übersetzungsverhältnis width=
Mixing and defoaming of two adjacent samples at once, directly in the cup, only by movement. Our first laboratory device with adjustable revolution/rotation ratio.

The ARE-400Twin – a highly efficient planetary centrifugal mixer: It uses a contactless method to mix, disperse and defoam two samples at once, directly in the cup without stirrer! With the included temperature sensors the status of your process can be constantly monitored. By the adjustable revolution/rotation ratio the mixer can be used with nearly any kind of pastes.
 
Der ARE-500 Planetenzentrifugalmischer, auch Planetenmischer genannt width=
Mixing and defoaming for technical centers – without vacuum in one single step.

The ARE-500 – A planetary mixer for technical centers and small-scale production where process times matter. Highly efficient mixing without stirrer. Often defoaming is possible without vacuum with the integrated Defoaming Mode with adjusted revolution/rotation ratio.


PLANETARY MIXERS WITH VACUUM
Der neue ARV-310P mit Touch Panel und RS232C-Schnittstelle width=
Mixing and defoaming in one step, enhanced by internal vacuum pump

Highly efficient vacuum laboratory mixer: uses contactless mixing method for homogenizing, disperging and defoaming with integrated vacuum pump, directly in the container without stirrer! The integrated vacuum pump is able to remove even the smallest of air bubbles.
 
ARV-501 Planetenzentrifugalmischer mit Pumpengehäuse PU-501 width=
Mixing and defoaming in one step with vacuum – technical center scale

The ARV-501 is a vacuum mixer for technical centers up to 700 g gross mixing capacity. The operator’s touch panel is similar to the ARV-310P. The RS232C interface is also included. Schnittstelle für eine PC-Verbindung ist vorhanden. Maximum speed in mixing mode is 1.500 UPM, in defoaming mode 2.000 UPM. Included is the pump undercarriage PU-501 with integrated vacuum pump.
 
Der ARV-931Twin Dual-Vakuum-Planetenzentrifugalmischer, auch Zentrifugalmischer oder Planetenmischer genannt width=
Mixing and defoaming of two samples in one step with vacuum – technical center scale

The ARV-931Twin – a highly efficient dual vacuum mixer: enables contactless mixing, dispersing and defoaming in a container without stirrer! The integrated vacuum pump removes even the smallest of air bubbles. The twin cup holder system effectively doubles the capacity of the mixer.
 
Der ARV-5000 Produktionsmischer. Die Signalampel zeigt den Betriebszustand width=
Mixing and defoaming in a single step for production, enhanced by integrated vacuum

The ARV-5000 – a highly efficient vacuum mixer for production: Enables contactless mixing, disperging and deaeration without foaming, directly in the container! The integrated vacuum pump removes even the smallest of bubbles.
 
Der ARV-10k Twin ist das Flagschiff der Thinky Vakuum-Planetenzentrifugalmischer width=
Mixing and defoaming of two containers simultaneously for production, enhanced by integrated vacuum.

Der ARV-10k Twin is the largest commercially available planetary vacuum mixer in the world. With a capacity of 2x 10 litres (net) or 2x 10 kg (net) it is fit for many production applications. The integrated SPC control and the CVT transmission enable maximum flexibility for the setup. Enables contactless mixing, disperging and deaeration without foaming, directly in the container! The integrated vacuum pump removes even the smallest of bubbles.


NANOMATERIAL DEVICES
PR-1 Nano PreMixer Vorderansicht width=
Disperging nano materials in dispersion agent by rotation and dual-ultrasonic. Including cooling system.

The PR-1 is a new pre mixing device for nano material dispersion. The combination of ultrasonic from two directions and rotational movement ensures a reproducible process in closed containers with short durations. The internal Peltier cooling system (optionally the content of the water bath can be recirculated over an external thermostat with compressor cooling) ensures the right temperature of the sample.
Request a quote

Technical support

Contact us!

Request a quote Technical support Contact us!
LINKS AND GTC    ///   IMPRINT    ///   DATA PROTECTION    ///   PRODUCTS    ///   DIESE SEITE AUF DEUTSCH