POTENTIOSTAT/GALVANOSTAT
Gamry Interface 1010 Potentiostat/Galvanostat/ZRA; Grundgerät für die Gamry EISBox1010 und Load/Power-Supply Interface (LPI) Hochspannungs-Testsystem für elektrochemische Impedanzspektroskopie (EIS) bei 10V, 100V oder 1000V incl. schwebende Masse (galv. Trennung von der Schutzerdung) width=
The Interface 1010 is a value oriented, general purpose potentiostat for almost all applications except for high current electrochemistry.

The "T(eaching)" version of the Interface 1010 can be purchased flexibly at a low entry level budget for almost all applications in electrochemical research and -industry. Later, if requirements increase, existing electronic components with higher specifications can be activated by means of a paid upgrade.
 
Gamry Reference 3000 Potentiostat/Galvanostat/ZRA für Korrosion (DC), Impedanzspektroskopie (EIS), Physikalische Elektrochemie (PHE), Pulsvoltammetrie (PV), Elektrochemisches Rauschen (ESA) und Elektrochemische Energie (PWR) incl. schwebende Masse (galv. Trennung von der Schutzerdung) width=
The high-end potentiostat for all demanding applications in electrochemistry from very low to high currents.

The Reference 3000 offers eleven current ranges between 300 pA - 3000 mA at a maximum of either ±3A@±15V or ±1.5A@±32V at the working electrode. Two additional gain stages (10x / 100x) extend to an even broader current range of 13 decades, allowing electrochemical impedance spectroscopy (EIS) on very high ohmic surrogates between 1 MHz and 10 µHz with current resolutions down to 100 aA per bit using state-of-the-art microelectronics and oversampling. Careful selection of electronic components and design result...
 
Gamry Reference 3000AE Potentiostat/Galvanostat/ZRA für Korrosion (DC), Impedanzspektroskopie (EIS), Physikalische Elektrochemie (PHE), Pulsvoltammetrie (PV), Elektrochemisches Rauschen (ESA) und für die Elektrochemische Energie (PWR) an Batterie-, Brennstoffzell- oder Superkondensator-Stapeln incl. schwebende Masse (galv. Trennung von der Schutzerdung) width=
The well-known high-end Reference 3000AE Potentiostat/Galvanostat/ZRA with eight additional auxiliary electrometers (AE).

With the eight additional channels of the Auxiliary Electrometer (AE) add-on option of the Reference 3000 Potentiostat / Galvanostat / ZRA, potential differences of either eight individual half cells of a stack or up to eight peripherical signal transducers can be measured. Each of the eight available electrometers (± 5 V vs. counter electrode potential) can clarify the impedance of a half cell in an electrochemical impedance spectroscopy measurement performed over the entire stack or to simply measure eight additional...
 
Gamry Reference 3000AE Potentiostat/Galvanostat/ZRA und Reference 30k Booster für Aufgabenstellungen in der Elektrochemische Energie (PWR) an Batterie-, Brennstoffzell- oder Superkondensator-Stapeln sowie elektrochemische Synthese bei großem Umsatzziel incl. schwebende Masse (galv. Trennung von der Schutzerdung) width=
The Reference 3000 (AE) Potentiostat/Galvanostat/ZRA high performance and multi-purpose basic unit can be combined with the Reference 30k Booster and is ideal for evaluating new highest-level technologies for batteries, fuel cells, supercapacitors and high turnover electrochemical synthesis.

The Reference 3000 is already a high-performance system, but with the addition of the Reference 30k booster, it can serve even more demanding applications. You can therefore make a valuable contribution at the highest level in basic research, electrochemical synthesis, and electrochemical energy storage. The Reference 3000 basic instrument can either be equipped later with 8 additional auxiliary electrometers (AE; Auxilliary Electrometer) by means of a hardware upgrade, or you can opt for the Reference 3000AE.


POTENTIOSTAT - MULTI-CHANNEL SYSTEMS
Gamry Interface 1010 8-Kanalpotentiostat; Grundgerät für die Gamry EISBox1010 und Load/Power-Supply Interface (LPI) Hochspannungs-Testsystem für elektrochemische Impedanzspektroskopie (EIS) bei 10V, 100V oder 1000V incl. schwebende Masse (galv. Trennung von der Schutzerdung) width=
Multi-channel systems are ideal for any application where significance can be increased by higher experimental throughput.

With the multi-channel potentiostat from Gamry, a single system can be flexibly configured from many channels for research purposes with high significance. Flexibility means to operate each channel individually, in groups or all together. Each channel covers either a current range from 100 pA to 1 A (IFC1010) or from 500 nA to 5 A (IFC5000) and can maintain a maximum potential of either ± 12V (IFC1010) or ± 6V (IFC5000) at the working electrode.
 
Gamry EIS Box 1010 für elektrochemische Impedanzspektroskopie (EIS) bei ±12 V je Zelle und bis max. 26 V in einem Zellen-Stapel incl. schwebende Masse (galv. Trennung von der Schutzerdung) width=
The Gamry EIS Box 1010 consists of an Interface 1010 base unit and an electrochemical multiplexer optimized for impedance spectroscopy (EIS) on batteries, fuel cells and super capacitors up to ±12 V.

With the EIS Box 1010, the detailed characterization of multiple batteries using the sophisticated method of electrochemical impedance spectroscopy (EIS) is intuitively possible and at the same time offers reliable results at high throughput. This efficiently accelerates tasks in quality assurance, material development and basic research of electrochemical energy storage devices.
 
Gamry EIS Box 1010 für elektrochemische Impedanzspektroskopie (EIS) bei ±12 V je Zelle und bis max. 26 V in einem Zellen-Stapel incl. schwebende Masse (galv. Trennung von der Schutzerdung) width=
The Gamry EIS Box 5000 consists of an Interface 5000 base unit and an electrochemical multiplexer optimized for impedance spectroscopy (EIS) on batteries, fuel cells and super capacitors up to ±6 V.

With the EIS Box 5000, the detailed characterization of multiple batteries using the sophisticated method of electrochemical impedance spectroscopy (EIS) is intuitively possible and at the same time offers reliable results at high throughput. This efficiently accelerates tasks in quality assurance, material development and basic research of electrochemical energy storage devices.


SOFTWARE
Gamry Software Korrosion (DC) für vielfältige elektrochemische Korrosionsprüfmethoden (Tafel, Polarisationswiderstand, Rp/Ec-Trend, etc.). width=
Gamry has developed its own software for each important application in electrochemistry and offers a very simple and intuitive handling through open source scripting, flexible and uncomplicated, even the customized experiment as well as with other programming languages such as LabView, C++, etc.

In a Gamry system, the electrochemical experiment consists of two separate operations, each in its own software environment. The recording of the measured data is done with modifiable scripts programmed in "Explain" in the Gamry Framework and their evaluation with modifiable Microsoft Visual Basic for Applications (VBA) scripts in the Echem Analyst.


GAMRY ACCESSORIES FOR ELECTROCHEMISTRY
Evaluierungsmesszelle für Batteriematerialien (LIB) incl. Halter mit vier Normschliffen (NS14/20) für 25 ml Zellvolumen; leicht zu reinigende Rundprobe, Folienprobe oder 1.5 mm Substrat-Halter, luftdicht verschließbare konische PTFE-Verbindungen. Montage in der Handschuh-Box und elektrochemische Tests im Freien sind möglich width=
The design of the Lithium Battery Materials Cell Kit allows very flexible investigation of electrode materials of a lithium-based galvanic cell.

The Lithium Battery Materials Cell Kit is available in the versions "standard", "half-cell" and "whole cell" and enables very flexible mounting and dismounting of up to three electrodes made of foil, wire or bulk material in a lithium-based galvanic cell within a glove box.
 
Gamry Universal-Batterie-Halterung (UBH) mit flexibler Kontaktierung und max. 30 A width=
The all-rounder among battery holders - designed for cylindrical 18650 cells as well as button cells - with high flexibility in dimensions and connection options

With the Universal Battery Holder (UBH) a variety of batteries can be connected to all available Gamry Instruments systems - from Interface 1010 to Reference 3000 (AE) including Reference 30k Booster - with a true “four-terminal Kelvin-type” contact, cycled up to 30A and characterized in terms of their impedance.
 
Gamry Batterie-Halterungen mit niedriger Induktivität für zwei Knopfzellen der Typen CR2016, CR2025 und CR2032 oder zwei zylindrische 18650 Zellen optional in Serie width=
For electrochemical impedance spectroscopy on the coin cell types CR2016, CR2025 and CR2032 or on the cylindrical 18650 cell

Gamry´s Low Inductivity Battery Holder for cylindrical cells (18650) and coin cells (CR2016, CR2025 and CR2032) can reduce unwanted impedances due to the cable connection and contact impedances to a minimum thanks to the four-terminal Kelvin-type gold-plated contacts. The leads on the printed circuit board also ensure reduced inductive crosstalk with about 500 pH to 5 nH.
 
Spitzkolben des Dr. Bob´s Messzellen-Sets für 1 ml – 30 ml Elektrolytvolumen incl. zwei Normschliffen (2x NS14/20) und drei Ace-Einschraubgewinden (3x #7) zur Aufnahme von zylindrischen Arbeitselektroden (6.5mm – 7.5mm) mit Platin-(Pt), Gold-(Au) oder Glassy Carbon (GC) Makro- (3mm) oder Mikro-Disk (10µm/11µm) width=
Dr. Bob´s Cell Kit is made entirely of inert materials and is used in a variety of applications to characterize unknown electroactive species.

Dr. Bob's Cell Kit can be used for various applications such as studies on enzymes and catalysts, electrochemical sensors, galvanic cells, redox potentials of inorganic complexes, etc. with micro and macro working electrodes made of platinum, gold or glassy carbon. Alternative electrode materials must be made available in holders of 110 mm length and diameters between 6.5 mm and 7.5 mm.
 
Elektrochemische Einwegsensoren mit 12 mm2 Arbeitselektrode (Pt, C), 30 mm2 Gegenelektrode (C) und 0.6 mm2 Referenzelektrode (Ag/AgCl-Paste) width=
Working electrodes of different dimensions and inert materials

Screen printed-, macro and micro working electrodes for analytical electrochemistry and basic physical electrochemistry
Request a quote

Technical support

Contact us!

Request a quote Technical support Contact us!
LINKS AND GTC    ///   IMPRINT    ///   DATA PROTECTION    ///   PRODUCTS    ///   DIESE SEITE AUF DEUTSCH