BORATE FUSION FLUXER
Katanax Fluxer K1 Prime mit geschlossener Sicherheitsabdeckung, in Betrieb width=
The Katanax Fluxer K1 Prime from SPEX – preparation of glass disks (beads) for XRF or solutions for AA and ICP with one sample position, fully electric without gas or other media ... Fusion has never been so easier and safer.

The K1 Prime has an intuitive touchscreen operation and works fully automatically, which ensures fast, simple and, above all, reproducible sample preparation with maximum efficiency. The change from preparing glass disks to solution preparation takes place in a few simple steps by replacing the crucible heater module with the (optional) stirring module without needing tools.
 
elektrisches Schmelzaufschlussgerät Fluxer X-300 von Katanax mit intuitiver Bedienoberfläche - ohne Gas im Labor width=
The Katanax Fluxer X-300 from SPEX - preparation of glass disks (beads) for XRF or solutions for ICP with one, two or three sample positions, fully electric without gas or other media ... Fusion has never been so easier and safer.

The modular X-300 from Katanax has an intuitive touchscreen operation and works fully automatically. Seven independently controlled heating elements made of acid-resistant ceramic guarantee exact temperature control and thus reproducible results with a long service life. The optionally available stirring module can remain installed permanently and enables a quick change from preparing glass disks to solution preparation.
 
Katanax X-Fluxer® X-600 mit geschlossener Sicherheitstür, Profilansicht width=
The Katanax X-Fluxer® X-600 from SPEX – preparation of up to 6 glass disks for XRF or up to 6 solutions for ICP in parallel - fully electrically without gas or other media ... Fusion has never been so easier and safer

The X-600 from Katanax has an intuitive touchscreen operation and works fully automatically. Seven independently controlled heating elements made of acid-resistant ceramic guarantee exact temperature control and thus reproducible results with a long service life. The optionally available stirring module can remain installed and enables a quick change from preparing glass disks to solution preparation.
 
SPEX Sampleprep Katanax XFP-01 FluxPenser® - Steuerung mit Waage, Dosiereinheit und Schmelzmittelflasche, betriebsbereit. width=
The automatic dosing machine SPEX Sampleprep Katanax XFP-01 FluxPenser® - precise and reproducible weighing of flux - including balance and LIMS compatibility

There are two operating modes to choose from for dispensing fusion flux, either dispensing a defined amount (for ICP) or dispensing a certain flux / sample ratio (for XRF). The correct amount of flux is calculated automatically, the accuracy of dispensing is within 1 mg.


PELLET PRESSES
Vollautomatische SPEX Presse 3636 X-Press® mit geschlossener Sicherheitstür, betriebsbereit width=
Pressing and pelletizing - reproducible - easy - fast ... the fully automatic and programmable 3636 X-Press® with a pressure range from 9.1 to 31.8 tons

The SPEX 3636 X-Press® is programmed by using the intuitive touchscreen display, the subsequent pressing process is fully automatic. By simply exchanging the pellet die set (without tools) it is possible, to produce pressed pellets with a diameter of 13mm, 31mm, 35mm and 40mm for XRF or IR measurements.


PELLET PRESSES
Manuelle SPEX Handhebelpresse 3626 Typ Carver® mit geschlossener Sicherheitstür und abnehmbarem Handhebel width=
Pressing pellets for IR-analysis - fast and economical ... the SPEX 3626 manually controlled laboratory press - an easy-to-use press with a pressure range of up to 10.9 tons for using the 13mm die set.

After closing the safety shield, the desired pressure for pressing the pellet is applied manually using the hand lever; the pressure can be read on the pressure gauge. Holding and relief time are regulated manually by the user.
 
Manuelle SPEX Handhebelpresse 3621 Typ Carver® mit geschlossener Sicherheitstür und abnehmbarem Handhebel width=
Pressing pellets for IR- and XRF-analysis - fast and economical ... the SPEX 3621 manually controlled laboratory press - an easy-to-use press with a pressure range of up to 10.9 tons for using various die set´s.

After closing the safety shield, the desired pressure for pressing the pellet is applied manually using the hand lever; the pressure can be read on the pressure gauge. Holding and relief time are regulated manually by the user.
 
Manuelle SPEX Handhebelpresse 3622 Typ Carver® mit Sicherheitstür und diversem Zubehör width=
Pressing pellets for IR- and XRF-analysis - fast and economical ... the SPEX 3622 manually controlled laboratory press – the “allrounder” with a pressure range of up to 22.7 tons for using various die set´s.

After closing the safety shield, the desired pressure for pressing the pellet is applied manually using the hand lever; the pressure can be read on the pressure gauge. Holding and relief time are regulated manually by the user.


ACCESSORIES FIR IR & XRF
Ersatz-Pressplatten aus poliertem Edelstahl für 40mm Presswerkzeug für die SPEX Pressen 3621, 3622 und 3636 X-Press® width=
Extract from the SPEX delivery program

We offer the following accessories for IR and XRF: • Binders, grinding and pressing aids (including UltraBind® and cellulose or paraffin-based products) • XRF cuvettes "X-Cell" for liquid or powdery XRF samples in different diameters and designs • Window films made of Mylar®, Kapton®, polypropylene and Ultralene® in different thicknesses and designs (pre-cut or as a roll) • Graphite crucibles in different dimensions and designs as well as accessories
Request a quote

Technical support

Contact us!

Request a quote Technical support Contact us!
LINKS AND GTC    ///   IMPRINT    ///   DATA PROTECTION    ///   PRODUCTS    ///   DIESE SEITE AUF DEUTSCH